This pool lift system allows the person to be transferred into the water in a sitting position.
The choice of model must always be accompanied by a preference for the type of floor application, which can be with bushing or with plate, and it is an accessory code.
For installation by the pool, you can choose between two solutions: 1) the socket with hole (accessory code 14185) or 2) the plate fixed to the floor (accessory code 14165). The prepared plate raises the entire structure of the lift by 20 cm. Both shell or plate solutions therefore have their identification code as a necessary accessory.
In the case of a hole in the floor, the inserted shell is supplied with a closing cap.
Once inserted, the lifter can, therefore, rotate 360° and the operator has comfortable grip handles. The safe working load is 135 kg.
The lifter can also be removed from its position by a single person, and the space required for storage can also be reduced by following a specific procedure.
A feature of this model is that it can overcome architectural barriers up to 60 cm in the case of installation with a socket, or up to 80 cm if the floor application is with a plate.
In these cases, the maximum height that the lifter can reach is 204-205 cm or 222-223 cm respectively.
The lifting arm is assisted by an electric actuator powered by a rechargeable 24 V battery. The battery charger is supplied as standard. The electric height adjustment takes place with a push-button control, and the lift is equipped with an emergency lowering mechanism.
A spare battery can always be useful to possibly avoid the risk of service interruptions. It is an accessory code AC0071.
The lift models with seat called Liftpool Seat are supplied as standard with a special wheelchair, which allows the person to enter the pool without having to make further intermediate transfers if the person is able to maintain the sitting position.
The wheelchair is therefore equipped with armrests, folding foot rests, and swivel wheels with individual parking brake, and its upper structure with the seat is quickly attached to the arm of the lift.
The wheelchair is supplied in the same color option chosen for the structure of the LiftPool Seat lift.
Consequently, the operator can proceed to disconnect the seat from the wheelchair with the person in charge, and to lead him into the water in a fully assisted way by the electrically operated lift.
The side armrests and the backrest itself offer the necessary safe containment of the person during the lifting and immersion phases.
In this configuration of the LiftPool lifter with seat, it is also possible to apply an extension to fully extend the legs accessory code 14255, creating a condition of further support in the taking advantage of immersion in water.
To meet aesthetic needs, and to harmonize with the environment or with the color choices of the pool furnishings, the lift structure can be chosen in three different colors: blue, white or gray.
Our LiftPool series pool lifts are therefore configurable, meaning that the identification code of the color of the structure must also be associated with the code of the model of interest.
In particular, B corresponds to the Blue color, W corresponds to white, and G corresponds to the gray to be added to the code of the chosen lift model.
This lift can also be installed by the pool in an outdoor environment. The frame is subject to particular painting treatment. In any case, it is advisable to remove the battery when the device is not in use. It may also be useful to adopt a protection.
N° Package | Package type | Dimension | Weight | Volume |
---|---|---|---|---|
1 | SCATOLA | cm 161 x 52 x 27.5 h | kg 44.5 | mc 0.23023 |
2 | SCATOLA | cm 89 x 58 x 96 h | kg 22 | mc 0.495552 |