LIFTPOOL E MAXI

This lifting system for swimming pools allows the transfer of the person in the water with a suitable loop sling. The lift is then supplied with a special standard slingbar for the application of the harness.

We have a wide range of slings available in five sizes. Please examine standard or hygiene harnesses; the latter are more recommended.

This model differs from the base model 14190 LiftPool E in its ability to overcome higher architectural barriers by the pool.

For floor application

For installation by the pool, you can choose between two solutions: 1) the socket with hole (accessory code 14185) or 2) the plate fixed to the floor (accessory code 14165). The prepared plate raises the entire structure of the lift by 20 cm. Both shell or plate solutions therefore have their identification code as a necessary accessory.

In the case of a hole in the floor, the inserted shell is supplied with a closing cap.

Once inserted, the lifter can, therefore, rotate 360° and the operator has comfortable grip handles. The safe working load is 135 kg.

The lifter can also be removed from its position by a single person, and the space required for storage can also be reduced by following a specific procedure.

When the pool edge is higher

This sling lifter is suitable and designed to overcome a poolside architectural barrier greater than 60-80 cm.

In particular, this model is capable of going beyond architectural barriers up to 120 or 140 cm in height depending on whether the configuration is respectively with shell or plate.

Electric lifting with battery

The lifting arm is assisted by an electric actuator powered by a rechargeable 24 V battery. The battery charger is supplied as standard. The electric height adjustment takes place with a push-button control, and the lift is equipped with an emergency lowering mechanism.

A spare battery can always be useful to possibly avoid the risk of service interruptions. It is an accessory code AC0071.

Frame colour

To meet aesthetic needs, and to harmonize with the environment or with the color choices of the pool furnishings, the lift structure can be chosen in three different colors: blue, white or gray.

Our LiftPool series pool lifts are therefore configurable, meaning that the identification code of the color of the structure must also be associated with the code of the model of interest.

In particular, B corresponds to the Blue color, W corresponds to white, and G corresponds to the gray to be added to the code of the chosen lift model.

Outdoor use

This lift can also be installed by the pool in an outdoor environment. The frame is subject to particular painting treatment. In any case, it is advisable to remove the battery when the device is not in use. It may also be useful to adopt a protection.