FISIOTEK 300 TS performs the same functions as model 3000 GS (code XRI001) but with the option of programming the parameters for the rehabilitation of the ankle.
It allows the passive mobilization of the knee, ankle and hip. This equipment runs on a direct current motor which transmits motion to a worm screw, while the motor itself is controlled by a circuit board with microprocessor. On the outside, there are a fixed keypad, which is used to program each function, and a floating keypad.
The equipment aims for the recovery of mobility in the joints of the lower limbs through the passive mobilization of the limb itself.
Fisiotek 3000 TS has a mobile memory card, which is a card containing a microchip. Equipment settings are stored on this card, which can also be used to enter patient data manually. A patient's individual memory card is also used to store the initial and final data entered for each rehabilitation session.
At the following session, the equipment can be set automatically by inserting the individual memory card.
You can also use one single memory card for several patients, but in this case you need to program the various equipment functions each time.
TECHNICAL FEATURES:
Knee and hip mobilization
Ankle mobilization
Use of Memory Card
Speed control (flexion/extension)
Workout duration control
Resistance
Automatic extension increase
Automatic flexion increase
Pause during extension
Pause during flexion
Warm Up cycles
Knee movement range: 0° ÷ 110°
Ankle movement range: 20° ÷ 0° ÷ 40°
Hip movement range: -7° ÷ 115°
Automatic extension increase limit
Automatic flexion increase limit
Repetitions at extension limit
Repetitions at flexion limit
N° Package | Package type | Dimension | Weight | Volume |
---|---|---|---|---|
1 | SCATOLA | cm 100 x 40 x 40 h | kg 16 | mc 0.16 |