The pulley therapy fixed metal frame system is modular, wide and flexible to meet the professional’s requirements depending on available space and type of exercises to develop.
The different frames can be fitted to the wall either horizontally or vertically or cantilevered.
It consists of modular frames that adapt to any operational needs and available space and, by using a series of harnesses for the body regions and a number of other tools to complete the required equipment, allow creativity in defining specific rehabilitation programs.
The frame shown here consists of the following elements:
N. 1 PIECE AR11002 - FRAME 2
N. 2 PIECES AR11A01 - STANDARD GRID
Note: Upon placing a purchase order for this type of configuration, please specify the codes and quantity as indicated above.
The L-frame shown consists of the following elements:
N. 1 PIECE AR11006 - FRAME 6
N. 2 PIECES AR11A01 - STANDARD GRID
This type of frame is recommended whenever there is limited operational space that needs to be optimized.
Note: Upon placing a purchase order for this type of configuration, please specify the codes and quantity as indicated above.
The solution proposed here is created from the following main frame plus additional standard grids, starting from the basic setting:
N. 1 PIECE AR11006 - FRAME 6
N. 2 PIECES AR11002 - FRAME 2
N. 7 PIECES AR11A01 - STANDARD GRID
This type of frame is also recommended when trying to optimize the available space, as in the configuration example n.2.
In particular, a very similar structure to the so-called "cage" frame was achieved, i.e. with four sides including the upper level.
Note: Upon placing a purchase order for this type of configuration, please specify the codes and quantity as indicated above.
The configuration shown here uses two available walls, one supporting the L-frame and the other one as a vertical support/work side, by applying another special frame. It therefore consists of the following structural and optional elements::
N. 1 PIECE AR11006 - FRAME 6
N. 1 PIECE AR11002 - FRAME 2
N. 1 PIECE AR11A06 - LONG BAR 200
N. 8 PIECES AR11A01 - STANDARD GRID
This type of frame is also recommended when trying to optimize the available space, as in configuration examples n. 2 and 3 previously described. However, the difference lies in a greater work surface provided by a second series of three grids attached to the back wall by adding one single tubular element identified as 200 CM LONG BAR.
Note: Upon placing a purchase order for this type of configuration, please specify the codes and quantity as indicated above.
ARCHIMEDES™ system - introduction - Pulley therapy frames - Wall frames - Ceiling frames - 2-sides frames - Self-supporting frames - Additional equipment - Straps and supports - Handles - Other tools - Sets of tools - ERCOLINA™ - POLIERCOLINA™ - Archimedes exercise guide - GPS Therapeutic pathways
Brochure, Ed. April 2024, English. 36 pages.